oldguy668
07-22-2015, 06:44 PM
I received two aluminum closeout panels for the forward side of the rear wheel houses. They are not identical, with one being about 1/2" taller than the other. FFR usually has the part number written on each piece of aluminum, but these two are not marked. I have a FIA pack list, so if someone can give me the two part numbers and tell me which is the taller of the two, I'll be all set.
The other question I have is the mounting scheme for the aluminum grille that goes in the hood scoop mouth. If anyone has a snapshot of that I might be able to figure it out. Is this piece something that goes in before or after paint.
Thanks
The other question I have is the mounting scheme for the aluminum grille that goes in the hood scoop mouth. If anyone has a snapshot of that I might be able to figure it out. Is this piece something that goes in before or after paint.
Thanks