FFR trunk install

[gwarden]

Can anyone send me in the right direction to find posts about installing the trunk kit? with pictures would be a big plus, and if not asking too much direct links to build pages that cover the subject?
Thanks

[michael everson]

I installed mine. Its pretty straight forward. I assembled the 3 pieces out of the car first to make sure it was all going to fit well together. then take it apart and put the end caps in first then the middle. Bolt them back together, then figure out where you are going to secure it. Mine is secured along the back edge of the trunk opening. As for the front side, I used a special bracket to mount it that comes with my engine cover hinge kit. Otherwise you need to bolt it to the engine cover. Take a look at this post for some pictures and tips
http://thefactoryfiveforum.com/showthread.php?17431-Engine-cover-hinge/page2
Mike

[gwarden]

Thanks Mike
Mine didn't look like it would fit with the three pieces put together I think it will interfere with the trunk lid hinges but I will try again tonight.
does it seal against the body?

[michael everson]

It doesn't fit bolted together. You need to assemble it in the car
Mike