Is there a source for high quality SS bellmouths?

[Hindsight]

I've seen a few various options. I'm planning on fabbing my own exhaust but I don't want to fab the bellmouth. I've seen some folks buy cheap down pipes on eBay, then cut off everything past the bellmouth collector and start fabbing from that point. I've looked at some of the down pipes on eBay and see only two that are inexpensive. One of them has what looks to be a fabricated two piece SS collector and one has what looks to be a cast iron collector welded to a SS 3" pipe. Not sure how well the cast iron to SS joint is going to hold up.

I'm curious to see which of these people have experience with and if anyone knows of any other sources for a quality bellmouth.

[mikeb75]

Kinugawa Turbo. Here is the TD04/05 (WRX & STI) bellmouth... price has gone up about $20 since I bought one. Works great.
http://shopping.kinugawaturbo.com/turbodownpipesubaruelbowimprezawrxstitd04ltd05.asp x

[Mitch Wright]

I also bought a Kinugawa SS Bellmouth for my VF37, the quality is good and it came with all the gaskets for the up pipe, bellmouth and Turbo.
Don't recall what I paid so it must have been reasonable.

[Harley818]

I bought the Kinugawa bellmouth from Flat Iron tuning. Mine was around $150 but now selling for $190
If I did it again, I would be looking for a bellmouth straight down rather than at 45 degrees.
I cut mine and welded up the muffler connection so it fit better.

[Hindsight]

Nice thanks guys. That is exactly what I was searching for.