3-link installation

[chopthebass]

I have just started prepping for my build and read the manual again. Now, I don't know much about rear ends but I opted for the 3-link upgrade. However I can't find any reference to the 3-link in the build manual. I'm also not even sure what the parts will look like when I start unpacking! so installing is going to be a challenge for me. If anyone has some really good photos or advice that would help me.

Thank you

[Jeff Kleiner]

If you purchased a base kit it is not in the manual. The supplemental 3 link instructions will be packaged with the parts and hardware when the kit arrives.

Jeff

[cmsu]

link for your perusal:

http://www.ffcars.com/FAQ/3link.html

[jimgood]

You can probably ignore any of the content in that link except for the product info itself. The link to the installation instructions doesn't work and the copied/pasted forum content at the bottom of the page is 13 years old and related to the MK1. :rolleyes:

[chopthebass]

link for your perusal:

http://www.ffcars.com/FAQ/3link.html

Hey thanks. That's very useful. I need to contact FFR as the link for the install doesn't work!

[jrcuz]

Maybe the ffr video on installing the rearend would be of some help.
JR

[chopthebass]

I watched the video. He removed the panhard bar from the chassis and that looks different to mine.

[CraigS]

Google 3 link here and the other forum. It's a pretty basic setup and I am sure you can find plenty of pics. You will also find threads where some have had a little difficulty bolting the bracket to the axle along w/ the cure.

[chopthebass]

cheers Craig