JeepFlyer
05-22-2015, 09:36 PM
Factory Five Roadster MkIV Complete Kit - SOLD
This kit was delivered in August 2012, and has about 200 hours of work completed. Extensive upgrades were included in the original purchase, as well as additional parts along the way. Approximately 75% of the sheet metal work is finished, with only the area behind the cockpit remaining. No panels have been riveted yet, but all holes are drilled and deburred. The front F-panels are powder coated black, as well as the radiator fan shroud, CNC triple reservoir, and engine compartment battery box. The kit has the upgraded IRS setup, and is currently a rolling chassis, with wheels and tires as listed below.
The plan was to put a coyote engine in this kit, therefore many of the parts in preparation for that are included. The engine and transmission were delayed as to not waste the warranty period until the kit was ready to accept them. The brake lines are run and the uprgaded Wilwood brakes are assembled and mounted. The power steering rack and pinion and the power steering pump are mounted. The fuel pump and fuel level sender are mounted in the tank, with the fuel lines ready to be mounted. A full listing of all parts and upgrades is included below.
Standard Width IRS Upgrade
17” × 9” / 17” × 10½“ Vintage Halibrand Replica Wheels
Nitto 555 Extreme 315/35R17 & 275/40R17 Tires (mounted)
12.88” Front Wilwood Brake Upgrade Kit
12.19” IRS Wilwood Brake Upgrade Kit
Forte Upgraded Aluminum Rear Differential Housing
Forte Torsen T-2, 3.55 Ratio Differential Upgrade
Forte IRS Knuckles & Hubs
Durolast Rack & Pinion (2.5 Turn)
Forte Offset Steering Rack Mounts
Fast Freddie’s Electric Hydraulic Power Steering Pump
Sidepipes Ceramic Coated Black
Breeze Aluminum Fan Shroud (Powder Coated Black)
Breeze Engine Compartment Battery Box (Powder Coated Black)
CNC Triple Reservoir (Powder Coated Black)
Billet Specialties Power Steering Reservoir
Billet Specialties Radiator Overflow Tank
Wind Wings Kit Add-on
Herb Fraser Carbon Fiber Door Panels
Speedhut GPS Speedo, Tach, and Quad Gauges
Two buckets of Lizard Skin Ceramic Coating w/ Sprayer
Black anodized stainless braid fuel lines and connectors
100 Cleco Temporary Fasteners and Pliers
Coyote Specific Parts:
Coyote Engine Mounts
Stainless Headers MFG. Four into One into Four Headers (Ceramic Coated Black)
Forte In-Tank High Pressure Fuel Pump
Russell Performance High Flow Fuel Filter
Moroso Low Profile Engine Oil Pan
Moroso Low Profile Oil Pickup
Aeromotive Fuel Pressure Regulator
Coyote J Pipe Headers (standard with kit)
Listed on multiple sites. Located in Clovis, NM.
This kit was delivered in August 2012, and has about 200 hours of work completed. Extensive upgrades were included in the original purchase, as well as additional parts along the way. Approximately 75% of the sheet metal work is finished, with only the area behind the cockpit remaining. No panels have been riveted yet, but all holes are drilled and deburred. The front F-panels are powder coated black, as well as the radiator fan shroud, CNC triple reservoir, and engine compartment battery box. The kit has the upgraded IRS setup, and is currently a rolling chassis, with wheels and tires as listed below.
The plan was to put a coyote engine in this kit, therefore many of the parts in preparation for that are included. The engine and transmission were delayed as to not waste the warranty period until the kit was ready to accept them. The brake lines are run and the uprgaded Wilwood brakes are assembled and mounted. The power steering rack and pinion and the power steering pump are mounted. The fuel pump and fuel level sender are mounted in the tank, with the fuel lines ready to be mounted. A full listing of all parts and upgrades is included below.
Standard Width IRS Upgrade
17” × 9” / 17” × 10½“ Vintage Halibrand Replica Wheels
Nitto 555 Extreme 315/35R17 & 275/40R17 Tires (mounted)
12.88” Front Wilwood Brake Upgrade Kit
12.19” IRS Wilwood Brake Upgrade Kit
Forte Upgraded Aluminum Rear Differential Housing
Forte Torsen T-2, 3.55 Ratio Differential Upgrade
Forte IRS Knuckles & Hubs
Durolast Rack & Pinion (2.5 Turn)
Forte Offset Steering Rack Mounts
Fast Freddie’s Electric Hydraulic Power Steering Pump
Sidepipes Ceramic Coated Black
Breeze Aluminum Fan Shroud (Powder Coated Black)
Breeze Engine Compartment Battery Box (Powder Coated Black)
CNC Triple Reservoir (Powder Coated Black)
Billet Specialties Power Steering Reservoir
Billet Specialties Radiator Overflow Tank
Wind Wings Kit Add-on
Herb Fraser Carbon Fiber Door Panels
Speedhut GPS Speedo, Tach, and Quad Gauges
Two buckets of Lizard Skin Ceramic Coating w/ Sprayer
Black anodized stainless braid fuel lines and connectors
100 Cleco Temporary Fasteners and Pliers
Coyote Specific Parts:
Coyote Engine Mounts
Stainless Headers MFG. Four into One into Four Headers (Ceramic Coated Black)
Forte In-Tank High Pressure Fuel Pump
Russell Performance High Flow Fuel Filter
Moroso Low Profile Engine Oil Pan
Moroso Low Profile Oil Pickup
Aeromotive Fuel Pressure Regulator
Coyote J Pipe Headers (standard with kit)
Listed on multiple sites. Located in Clovis, NM.