Free 89 Mustang GT Master Cylinder, Powder Coated Sparkly Red

[mjazzka]

So I am going rear disc brakes and didn't know I needed an upgraded master cylinder... of course I found out AFTER I ordered, took apart, and powder coated this one. The inside of it is perfectly smooth and good to go, new seals and reservoir and everything. So anyway, it's anyone's for the cost of shipping.

Disclaimer: The powder coat is actually a little more purple than the pictures show, I haven't been able to get a good picture of the real color of it due to the nature of the powder coat. I should also mention this is from RockAuto and does not have the Ford logo on it. It is functionally the same though.

http://i950.photobucket.com/albums/ad343/mjazzka/65%20Daytona%20Coupe/20150515_190129.jpg (http://s950.photobucket.com/user/mjazzka/media/65%20Daytona%20Coupe/20150515_190129.jpg.html)

http://i950.photobucket.com/albums/ad343/mjazzka/65%20Daytona%20Coupe/20150515_190138.jpg (http://s950.photobucket.com/user/mjazzka/media/65%20Daytona%20Coupe/20150515_190138.jpg.html)

[bil1024]

PM sent

[ricobrafan]

I am looking at upgrading to rear disc as well with my roadster. Which master cylinder did you go with? Thanks.

[mjazzka]

Looks like the MC is gone, thanks everyone.

ricobrafan, I am going with a 93 cobra master cylinder from RockAuto. It's got a 1" bore through the whole thing. I've been told it'll do the job!

http://www.rockauto.com/catalog/moreinfo.php?pk=1608706&cc=1134076&jnid=539&jpid=10

[MPTech]

Wow! That has to be the prettiest M/C I've ever seen! (makes my aluminum spray painted one look humble)
btw, I installed a 1" bore ’95 Mustang Cobra M/C (Dorman Master Cylinder M390125). Works well for my 4 disc setup.