ckrueger
04-07-2015, 08:16 AM
I am ordering a set of the Stainless Headers. I recall some discussons on studs vs bolts, etc, especially on the DS. What have you guys done/recommend????
Thx
donshapansky
04-07-2015, 09:22 AM
I left the studs in, I don't like a bolt into aluminum due to heat cycles and eventually damaged threads if I ever had to remove a header. My application is a 33 HR and I had to lift the engine and remove a motor mount on the RH side to get 2 nuts started and torqued.
Don