Girling Brake Reservoir -AN

[MillerCobra]

Hi everyone, I am at the point with my build of plumbing my Girling Brake Reservoir’s. I want to use –AN fittings and ordered 6-AN which are too large. I believe that I should order 4-AN but Summit Racing is telling me that there are no 4-AN hose fittings/adaptor for 7/16 20, which is the inlet size on the FFR supplied Wilwood master cylinder and the exit size on the Girling Reservoir from Moss. What fittings/adaptors have some of you used? Thanks!

[Bob Cowan]

Here you go, straight from Wilwood. http://www.wilwood.com/LineKits/LineKitsProd.aspx?itemno=220-7537

[Gumball]

I have the Girling cans from Moss, too. I used adapters for the OEM Ford master cylinder from Lodestone Billetworks (FFR specific parts supplier - http://www.lsbilletworks.com/) to connect to the braided lines. All of my lines and fittings came from Pegasus Auto Racing (in New Berlin, WI).

Here's a pic of the setup:

http://i845.photobucket.com/albums/ab15/CCRsAC/img_4047.jpg (http://s845.photobucket.com/user/CCRsAC/media/img_4047.jpg.html)

[MillerCobra]

That is exactly what I am shooting for. Thanks !!

[Gumball]

A couple more photos...

http://i845.photobucket.com/albums/ab15/CCRsAC/img_4046.jpg (http://s845.photobucket.com/user/CCRsAC/media/img_4046.jpg.html)

http://i845.photobucket.com/albums/ab15/CCRsAC/img_4054.jpg (http://s845.photobucket.com/user/CCRsAC/media/img_4054.jpg.html)

[MillerCobra]

Thanks again!

[christenfreedman]

I am just using a new 7/16 banjo fitting with 4an ends that I can use with the wilwood mc...