PDA

View Full Version : IRS Circlip source needed



ironman16nc
02-15-2015, 04:57 PM
I'm assembling an IRS on a MKII Roadster and am in need of two circlips used to hold the axle shaft onto the tri-lobe bearing and the outer CV. The Ford '97 Thunderbird part numbers are E9SZ-4K184-B and E9SZ-4K237-B. Auto parts say its a Ford supplied part and Ford says they are discontinued. :( I've done web searching with no luck. Does anyone know where I can get these? I need two of each. See pic.
38778

jrcuz
02-15-2015, 08:43 PM
Try mcmaster.com they have a wide variety of items
JR

Bob Cowan
02-16-2015, 12:52 AM
They are hard to come by. I got mine from Mike Forte. You can also (usually) get them from Disc Brakes R Us.

NavyChief
02-16-2015, 05:29 PM
Rock auto has 4473282 part number for the clip. Said 3 available.

ironman16nc
02-20-2015, 10:26 AM
Thanks all! Mike Forte was able to get his hands on the outer clips for me. I'm still trying to source the inner (thick) clips.