Log in

View Full Version : New Build Thread



NorCal Ray
02-09-2015, 12:41 AM
I received my 818R kit the end of May 2014, I have been so busy in my construction business I have not had very much time to work on the build. I have been very active on reading all the posts in the forums. I want to thank everyone for all the tips, shortcuts and the right and wrong way to assemble the 818R.

First thing I did was purchase a pair of Sparco EVO seats and set them in the car to see how they fit. I am 6'3" and my son is 6'6" and realized that I did not have near enough leg room to drive the car. I needed to move the driver seat back to the rear firewall and instantly knew the supplied fuel tank had to go. I bought a DEI fuel cell and it allowed me to move the driver seat all the way back.38584 After seeing other 818R builds, I decided I needed a drivers full containment seat if I wanted to race the car. New seat was about 2 1/2 inches wider then the EVO. I cut 6" off the end of the fuel cell, re-powder coated...everything is "golden"

I don't want to bore you all with all the things I did, so I will just post imagines of the progress of the build up to where I am now. Please let me know if you see anything that I need to address or change.3859338594385953859638597385983859938600386 01

crspdsk8
02-09-2015, 02:43 AM
It's cool to see another FFR builder in the Sacramento area! I am in Antelope and just completing my 33 build that I started at the end of October 2013. Looks like you making good progress on your 818! That is one I have been considering doing next so looking forward to following your build.

Good luck on your build!

Charles

wallace18
02-09-2015, 07:22 AM
Looks great! keep posting.