No spark,02 turbo

[glennz28]

Went to start today no spark ,fuel pump working, turns over fine , deleted security unit does 02 have Any help would be appreciated thanks

[metalmaker12]

First check your battery is in good shape, 12v or better while cranking. Use a jump pack if you have to. Also make sure that the ignition fuses are in good shape etc. Last, for now...check if anything was disconnected during your swap over. Try this first than see what happens.

[Harley818]

also, make sure everything is grounded ecm, fuse and relay panels etc. including the intake manifold if you have thermally isolated it from the block.
It does make a difference...... ask me how I know :)

[iWire]

also, make sure everything is grounded ecm, fuse and relay panels etc. including the intake manifold if you have thermally isolated it from the block.
It does make a difference...... ask me how I know :)

Yes. This is a very big one. Anytime an aftermarket gasket is used, put in a ground strap from the manifold to the block/chassis.

[glennz28]

Found problem, accidently cut wire to coil in harness, easy fix, fired right up. next is lights before I organize wires. Glad you guys are out there to help. Thanks again