security delete

[glennz28]

Thanks for help on integrated unit. What about security system delete ? 02 turbo donor

[billjr212]

Plug B59 is a 6 pin plug for the security interrupt relay. When you delete that, you will simply need to jumper the white/red and white/black wires together. This allows power to flow from the ignition switch to the starter relay.

[glennz28]

Thanks for your help

[Tamra]

Plug B59 is a 6 pin plug for the security interrupt relay. When you delete that, you will simply need to jumper the white/red and white/black wires together. This allows power to flow from the ignition switch to the starter relay.

I searched everywhere on Nasioc for this and couldn't get a clear, concise answer. Thank you!

[iblackwe]

Do you have the wiring diagram for that security delete? I have already deleted mine without realizing this and I need to find out where the pins run to in order to replace and then jumper them. It would be much appreciated!

[glennz28]

I got my wiring harness diagram from ken-gilbert.com. Earlier answer to my post gave me instructions ,page 125 starter system interrupt relay with security system connector b59, I deleted all other wires coming out of security system box
I think that's the most important part. I'll find out eventually. This wiring has to be the hardest part. white/red-white/ black together

[iblackwe]

I somehow got really lucky... My donor had an aftermarket security system installed on it. While I was tearing that system out I noticed that they had installed a jumper plug between the WR and BR wires. Thinking I shouldn't change anything I decided to solder those together to eliminate the plug they had used to jumper them together. Turns out those are the two wires I needed to bypass. Crisis adverted, thanks for the help!

[Tamra]

So ours has red and white but there is no black and white. We drove the car last night with the security module disconnected. Can we just delete all the wires or do we still need to jumper any wires together? We have an 02 ecu.

[Harley818]

I deleted the security, ABS, Integrated module and other stuff.
I connected the WB to the WR and started it for the first time today.... started great with the clutch interlock. I haven't had much time on it though......