Building up the corners

[Quiny]

Does anyone have any advise on how to build up some of the edges and corners on the fiberglass panels. What is a good product to use? I did get the FFR gel coat touchup supplies, does anyone know if that is laminating gel coat or does it have wax in it? My concern is how do you cover a corner or edge once the gel coat is applied? I think I lot of us have corners or edges that need touchup.

[Tony Zullo]

You can use Mar-Glass filler it works great i use it all the time..

[Bob_n_Cincy]

You can use Mar-Glass filler it works great i use it all the time..

Hey Tony, thanks for chiming in here.
A lot of us have NO body work capability at all. (me included) Can you point us to a video that best shows us the procedure to fix the edges and corners?
Thanks
Bob

[Tony Zullo]

It works just like body filler ...two part mix

[Jeff Kleiner]

A lot of us have NO body work capability at all. (me included) Can you point us to a video that best shows us the procedure to fix the edges and corners?
Thanks
Bob

Bob,
Although it isn't a video perhaps following this procedure will help ;)

https://www.google.com/maps/vt/data=U4aSnIyhBFNIJ3A8fCzUmaVIwyWq6RtIfB4QKiGq_w,hr IHwcAeSryQSN5UvLAhBU5pu4oA0PeUc2Zxg37rDOt4huLzuuCq SRGFKcMeW5vnieCS-gDIEYZ_HW-HcY8oW-ZEzVKBerZDASukggcT8xAFtfHiHBuPtcQgffhKRiMeIoh5kxWq ZayJbqFalNc1BfbUNQ,2cfnDrb67vQUw5D-6o-5o-yP4CjvPIkHmhA-7upz-BAVoC3rCxryMrg98mWkU8PNvwDMOXJjtuR4-kI0TSayJgA6S699qz-uzCXQ9wkFADZsE6yQRD7vvUksomqzUGYtWUNSGh5a1c7s3pUc7 2ikgWxWrSLOFPA7CRi4Q7f3L68Tc323OcbN2hvmTUfkao0EBMG rFqGNK1z_Y7FORV5DakLydNX0LU5u3f-qzNqkdUpj8VSEE3hFzCR7ypgI3vh6HJ75vhj0nVr806KVLXIrm yX0kNbQPPO-XZKATqjkmNAbMXALvsf6CxXO5PQ&h=200&w=555&scale=1

Jeff

[Quiny]

Bob,
Although it isn't a video perhaps following this procedure will help ;)

https://www.google.com/maps/vt/data=U4aSnIyhBFNIJ3A8fCzUmaVIwyWq6RtIfB4QKiGq_w,hr IHwcAeSryQSN5UvLAhBU5pu4oA0PeUc2Zxg37rDOt4huLzuuCq SRGFKcMeW5vnieCS-gDIEYZ_HW-HcY8oW-ZEzVKBerZDASukggcT8xAFtfHiHBuPtcQgffhKRiMeIoh5kxWq ZayJbqFalNc1BfbUNQ,2cfnDrb67vQUw5D-6o-5o-yP4CjvPIkHmhA-7upz-BAVoC3rCxryMrg98mWkU8PNvwDMOXJjtuR4-kI0TSayJgA6S699qz-uzCXQ9wkFADZsE6yQRD7vvUksomqzUGYtWUNSGh5a1c7s3pUc7 2ikgWxWrSLOFPA7CRi4Q7f3L68Tc323OcbN2hvmTUfkao0EBMG rFqGNK1z_Y7FORV5DakLydNX0LU5u3f-qzNqkdUpj8VSEE3hFzCR7ypgI3vh6HJ75vhj0nVr806KVLXIrm yX0kNbQPPO-XZKATqjkmNAbMXALvsf6CxXO5PQ&h=200&w=555&scale=1

Jeff

that link is a map from Cincinnati to Bloomington

[Jeff Kleiner]

Yes it is. Bob will get it!

Jeff

[Bob_n_Cincy]

Thanks Jeff
After I handle any fitment issues, do you want the whole car or just the panels?
Bob

[Mechie3]

HAHA! I got it.

[Quiny]

Funny, I get it now.

[Bob_n_Cincy]

here is a picture of one Jeff just finished. Sure is nice looking:o

http://thefactoryfiveforum.com/attachment.php?attachmentid=36192&d=1417630166