View Full Version : Power to the harness
palomino
11-27-2014, 12:43 PM
I am ready to power the harness but have a problem. This harness war removed by someone else from a wreck.
Power comes from the hot side of the starter to where?
Also, the two wires referred to in the manual go to where? Nothing in my harness seems to go here.
metalmaker12
11-27-2014, 05:50 PM
The starter has a power wire that goes to the main fuse box, the red FFR starter wire provided goes to starter also, here's a pic. The smaller black covered wire is the wire from main fuse box.36061
philly15
11-30-2014, 07:45 PM
I am ready to power the harness but have a problem. This harness war removed by someone else from a wreck.
Power comes from the hot side of the starter to where?
Also, the two wires referred to in the manual go to where? Nothing in my harness seems to go here.
normally the power wire goes right to the battery. I just hooked mine up like it sits normally in the wrx. Power from starter to battery, then I extended the double white wire off the alternator which hooks in through two double white wires on the main fuse box. There is a spot on the main fuse box the battery then hooks to. So essentially the alternator charges the battery through the 120A main fuse. Works just fine. I can see if I can find the wiring diagram for you.
philly15
11-30-2014, 07:50 PM
http://i981.photobucket.com/albums/ae293/philly1515/power.gif (http://s981.photobucket.com/user/philly1515/media/power.gif.html)
http://i981.photobucket.com/albums/ae293/philly1515/start.gif (http://s981.photobucket.com/user/philly1515/media/start.gif.html)