push on to -an fuel line fittings

[Samiam1017]

I saw a picture yesterday on the forum of push on to-an fittings. Can't find it now. I'm looking for the size or part numbers for for both the feed and the return lines. Thx in advance for any info

[Scargo]

No problem. Jegs, Summit and others have them. Not only that, you can get different styles.
This is the Russell fitting I've used. You screw it together. (http://www.summitracing.com/parts/rus-644123) No special tools required.
JEGS (http://www.jegs.com/i/JEGS-Performance-Products/555/103100/10002/-1): some plastic.
Russell Performance. (http://www.russellperformance.com/mc/adapter-fittings/specialty-fuel-injected.shtml)May be same as Jegs.
Rodger Clark Motorsports. (http://www.rogerclarkmotorsport.co.uk/shop_detail.asp?productID=982)

[Bob_n_Cincy]

I used the Russel part on my gas tank and in the engine.
35925

[Samiam1017]

Thx guys. Bompus gave me the Russel numbers his build thread is the pictures I noticed thx

[sponaugle]

Thx guys. Bompus gave me the Russel numbers his build thread is the pictures I noticed thx


I am a fan of the Aeroquip Socketless Push-lock fittings:

http://cdn.racerpartswholesale.com/images/uploads/3340_1503_large.jpg.

The aeroquip socketless hose is very strong and abrasion resistant.

http://static.summitracing.com/global/images/prod/mediumlarge/aer-fcv1015_w_ml.jpg

It takes a bit of muscle to get the fittings on the hose, and it is nearly impossible to remove the fittings without cutting the hose... so those fittings are not going to come out accidentally.

Jeff