Hindsight
10-09-2014, 02:25 PM
The FF manual shows you removing the nut (with washer), then an outer bearing and splined collar, then the inner thrust bearing. Between the collar and the thrust bearing, I had a big spacer-washer. In the pic below, the parts are in order with the left side part being inner-most on the transmission. I removed all this, installed the FF provided adapter collar, then added the washer on top of it, and the nut on top of that. In the pic below, the manual doesn't mention or show the spacer between the collar and thrust bearing (the part second to the left). I'm pretty sure I am supposed to remove it but just wanted to check and make sure before I bolt the rear cover back in place.
http://i.imgur.com/NjKa3tc.jpg
http://i.imgur.com/NjKa3tc.jpg