Throttle Cable Routing

[Buzz Skyline]

This seems like it should be an easy one, but I can't find it in the manual or on the forum . . .

What is the best way to route the throttle cable? (I'm using an '02 donor, of that matters.) Does it go through the tunnel? If so, I assume it passes through the large grommet in the firewall - is that right?

Thanks,

Buzz

[D Clary]

I ran mine through the small grommet on the left and through the tunnel, might be wrong but it looks ok

[Quiny]

I went through the large grommet hole since the 2 smaller are being used by my shifter cables. It's a little short IMO but it works. I secured it with p-clamps inside the tunnel. You can see it on my build thread.

[D Clary]

I have k-tune shifter so I have empty holes to use