Aluminum Fuel Tank GTM Boyd Welding

[DaveBoyd]

Our replacement aluminum tanks for the GTM are now available on our website. http://www.fueltankparts.com/replacement-tanks/factory-five-racing/factory-five-gtm.html


31578315793158031581

[crash]

Our replacement aluminum tanks for the GTM are now available on our website. http://www.fueltankparts.com/replacement-tanks/factory-five-racing/factory-five-gtm.html


31578315793158031581

Are you aware that another forum vendor already provides this replacement part? Not saying yours isn't slightly different or that there is some obligation to not make a part that some other vendor already provides, but maybe get you two talking so there are no hard feelings? I know I was more than ticked off when another forum member copied my part that I had developed TO THE TEE and then suggested that he makes them much cheaper than me and, well, there it was. He wasn't/isn't even a vendor. Just trying to head off any potential problems. :)

[DaveBoyd]

Are you aware that another forum vendor already provides this replacement part? Not saying yours isn't slightly different or that there is some obligation to not make a part that some other vendor already provides, but maybe get you two talking so there are no hard feelings? I know I was more than ticked off when another forum member copied my part that I had developed TO THE TEE and then suggested that he makes them much cheaper than me and, well, there it was. He wasn't/isn't even a vendor. Just trying to head off any potential problems. :)

Hi crash, Thank you for your feedback. Until just now I was not aware of anyone building aluminum tanks for the GTM. With that comment it prompted me to do a quick google search to see what or who you were referring to, now i see what you are talking about.
I assure you that the few similarities, Mostly regarding the tank shape is purely coincidental because of the unique location in the chassis provided by FF.

[Presto51]

Are the tanks sold as complete as in the pictures ?

Ron

[DaveBoyd]

Are the tanks sold as complete as in the pictures ?

Ron

Hi Ron,

Here is the description from our website,

Product# 14037

Tank Material: 1/8" Aluminum

Fill: 2.25 OD

Crossover Vents: 1/4" NPT with Brass barbs included

-16 AN Male for crossover tube

CNC Machined Flanges to accept OEM Pump systems.

These flanges were designed to be used with the pump system from a 2008 Z06 Part numbers 15785205 and 15785204 but should be the same pumps in 2004-2012 corvettes and XLR.

Pumps Shown are NOT included

Both Tanks are Included