steering rack

[Walt]

Anybody know how much needs to be cut off of the inner tie rods on a ffr manual rack usins stock mustang spindles?

Thanks

Walt

[UpstateCobraGuy]

Hold up on the cutting wheel, you may have the wrong length tie-rod ends. Post a few pictures before you start hacking!

Pat

[edwardb]

I would install the rack, install your suspension, get the front end alignment roughly right, then look at what needs to be cut. Not before.

[Walt]

I have it all together with body on, I am changing from a non powered rack to the new one, with it all together and setting on the ground front tires are out on the front by approx. Two inches. I did talk to ffr and he said to cut them 1/2 inch then he said 3/4 inch, would like to only do this one time.