FFR New Clutch Quadrant assembly

[ponyboy1965]

I supposedly have the new clutch quadrant assembly from FFR and it looks nothing like the one the book or any other pictures I have seen online. FFR told me they were now starting to fab up there own assembly which leaves me completely guessing. I'm going to attempt to post pics but I'm not very tech savy. So any guidance or pics to help me understand would be awesome!

[skullandbones]

So FFR is making a kit out of the quadrant. You must sandwich the pieces together instead of having a billet piece. It should work OK. It's probably a lot cheaper to fabricate, too. I would have scratched my head on that one, too. Good luck, WEK.

[FFinisher]

You will find this works awesome, it does not put any sideload on thr clutch arm and pulls the cable straight. I have used it on two cars, its is a great improvement!

Kudo's to FFR for continuous improvement.

[Carlos C]

Is that it? If it wasn't for the statement that this is the new quadrant, I would never be able to guess what it was by simply looking at the photo. It may work great, but it seems to be a little over-engineered. At least I know what it looks like now.

If you don't know how to put it together, and no instructions came with it, call FFR. They should have the instructions on PDF format, which they can e-mail to you.

Carlos

[ponyboy1965]

Do you have any pics on how it's assemblemed?

[ponyboy1965]

Got ahold of FFR today and they sent me the .pdf link... Moving along again, although the main bracket that holds the assembly needed a notch taken out. Nothing the ole sawzaw couldn't handle.

[Carlos C]

Glad to see that FFR hooked you up. Keep plugging away!

Carlos

[fumptycars]

Do you mind posting the PDF instructions? I'm running into the same issue.

[ponyboy1965]

https://www.factoryfive.com/wp-content/uploads/2014/06/Mk-4-Roadster-Complete-Manual-rev-3X.pdf