Motor and trans mounts for coupe???

[wallace18]

This kit is different than my 33 kit. Since I am using a 5.0 and T-5 from an 89 Mustang GT, do I just get HD mounts for the Mustang to go into the Coupe? The 33 kit came with mounts. Anyone have certain ones that worked well for them? Thanks. TW

[GThompson]

I bought a set of Prothane mounts and found that the engine sat about an inch too high. I swapped them out for a set of OEM-style rubber mounts for a '87-'93 5.0 convertible from Advance Auto. The engine sits exactly where it needs to be but the mounts are way too soft, engine rocks too much. I'm thinking about making a set of aluminum mounts.

[John Dol]

I have the poly mounts from FFR. They seem to work fine.

John

[HCP 65 COUPE]

Im pretty sure the fox mustang motor mounts are differant for a convertable and a 3door/notch back but I dont remember which one makes the engine lower/higher than the other. I used the poly mounts from FFR

[wallace18]

I ordered the poly mounts from energy suspension. I think they are the same ones FFR uses. I found it strange that they came with the 33 kit and not the coupe.