What size aftermarket steering wheels

[Samiam1017]

What sizes are the builders using that are using aftermarket wheels. Dia? Dimension from the factory mounting location to the rim. And how it fits ya. Maybe even pics if ya got em. I know seat location and all that are gonna have a huge effect. But it's a starting point at helping some builders choose. Thx sam

[wleehendrick]

I have a 320mm NRG wheel. I lowered my column about an inch and used and NRG short hub with it. I'm using fixed back buckets with sidemounts on the floor, so it's low:

http://thefactoryfiveforum.com/attachment.php?attachmentid=30001&d=1402528598

30001

[07FIREBLADE]

I was just looking for this type of thread but last week. I ended up trolling throug hall of the build thread to gauge what type of wheel and diameter would work best. I ended up settling on a Momo Tomcat, 350mm, attached to the Works Bell Rapfix II and short hub. Just need to figure out how to wire the horn up. Will post pictures when I get home. Haven's sat in the car yet with the wheel installed. My seat are currently out due to wire harness diet and install.

[Evan78]

I just did a quick search and it appears OEM WRX and STi wheels are around 370-385mm. Just thought I'd add that as a frame of reference for anyone like myself.

[K3LAG]

I was just looking for this type of thread but last week. I ended up trolling throug hall of the build thread to gauge what type of wheel and diameter would work best. I ended up settling on a Momo Tomcat, 350mm, attached to the Works Bell Rapfix II and short hub. Just need to figure out how to wire the horn up. Will post pictures when I get home. Haven's sat in the car yet with the wheel installed. My seat are currently out due to wire harness diet and install.

Wiring directions for the horn with the rapfix ii are in my build thread.

Larry