Wilwood Master Cylinders

[RdstrRod]

Things are progressing smoothly with my MK4 build. Front suspension & Rear Axle mounted, Pedal Box assembled/temporarily installed, and lots of aluminum panels drilled, Sharkhided & ready to install. I am now ready to mount the front & rear Wilwood Brake Master Cylinders, but notice that they are 2 different sizes. One is 3/4" and the other is 5/8". Is this correct? If so, which one goes where? I don't see where either my manual or the Wilwood instructions address this.
Regards, Rod

[jrcuz]

RdstrRod,
I just watched the latest Mk4 build video episode 10 and Dan says later Mk4 kits have the two different sizes of M/C. The 3/4 in is for the front brakes and the 5/8 in is for the rear brakes.
jrcuz

[Pylons]

RdstrRod,
I just watched the latest Mk4 build video episode 10 and Dan says later Mk4 kits have the two different sizes of M/C. The 3/4 in is for the front brakes and the 5/8 in is for the rear brakes.
jrcuz
thanks...I had started a thread about that a few days ago and got no definitive answer