View Full Version : Looking for Clecos
Well, I'm working on getting all of the aluminum on the frame, and I've run out of Clecos. Does anyone have some I can buy/borrow/rent? Thanks!
(I'm also posting this on the other forum, fyi)
hrosenthal
06-01-2014, 02:27 PM
I bought a bunch at Summit when I started my build.
I use both 1/8 and 3/16.
RM1SepEx
06-01-2014, 02:42 PM
Ebay
http://www.ebay.com/itm/50-New-1-8-Cleco-Fasteners-Clecos-/130803387157?pt=LH_DefaultDomain_0&hash=item1e747d4b15
http://www.ebay.com/itm/50-New-3-16-Cleco-Fasteners-Clecos-/130688213775?pt=LH_DefaultDomain_0&hash=item1e6d9fe30f
VD2021
06-01-2014, 04:38 PM
If you start with 50 or even 25 you'll have ample. Just don't cleco every hole you drill. Placing a cleco in every hole just consumes time and there's really no need to.
wallace18
06-01-2014, 05:45 PM
Mike Everson from the forum sells them on his website also.
Bob Cowan
06-01-2014, 10:49 PM
If you start with 50 or even 25 you'll have ample. Just don't cleco every hole you drill. Placing a cleco in every hole just consumes time and there's really no need to.
I agree with this. I think I bought a total of 20-25 of them. For a 3/16" hole, I used a 1/8" clecko and a backing washer.