View Full Version : RoRi's Custom Parts - Radiator Spacers
These spacers raise the radiator by 18mm giving you the clearance you need to prevent the steering rack bellows from rubbing on the radiator hose. They are grooved on the inside to retain the OEM bushing. The bottom protrusion is offset by 1mm acting as a cam and allowing you to fine tune the placement of the radiator left, right, fore, aft, or simply to compensate for imperfectly welded tabs on the FFR frame. Includes 2 spacers, 2 washers, and 2 button head screws.
$60 plus $5.80 priority mail shipping in the USA. International shipping available.
Radiator Spacer:
http://i.imgur.com/0TXgcBF.jpg
With bushing installed:
http://i.imgur.com/gx1VuiF.jpg
Bottom Cam is offset 1mm and fits into FFR frame:
http://i.imgur.com/iwEnFkl.jpg
Installed:
http://i.imgur.com/ITT7JOg.jpg
Complete package:
http://i.imgur.com/1huLMRM.jpg
metros
05-29-2014, 07:15 AM
Payment sent via PayPal. Thanks for continuing to produce these great parts that make those little tweaks straight forward.
tmoretta
06-04-2014, 09:56 AM
After raising the radiator, any problem with hood or other body part clearance?
Mechie3
06-04-2014, 10:37 AM
There should be plenty of clearance. I raised mine up quite a bit and still have a good inch of clearance IIRC. The main reason to raise it is because if you don't the lower hose hits the steering rack bellows.
tmoretta
06-04-2014, 10:41 AM
Thanks
Triathletedave
06-04-2014, 11:50 AM
After raising the radiator, any problem with hood or other body part clearance?
What has to be done with the top brackets on the radiator if you raise the bottom? Does the kit include 18 mm spacers for the top as well? Can you post a picture of the solution on top please?
Cheers,
Dave
What has to be done with the top brackets on the radiator if you raise the bottom? Does the kit include 18 mm spacers for the top as well? Can you post a picture of the solution on top please?
Cheers,
Dave
I used Mechie3's solution: http://thefactoryfiveforum.com/showthread.php?13963-Radiator-Supports-Zero-Decibel-Motorsports
flynntuna
06-04-2014, 12:21 PM
If there's an inch or so above between the radiator and the hood, won't a portion of the airflow bypass the radiator and out the hood vents? Would a fitted sheet of aluminum from the radiator between the headlights to the end of the hood be worth the effort?
10 more sets now in stock. PM me if you are interested. Thanks
10 more sets arrived today. PM me if you need some.
Lmmmax
05-20-2015, 07:10 AM
Do you still have them available
Yes, I have a few sets left.
I have 8 sets left. These will be the last of them. PM me if you are interested.
longislandwrx
03-20-2016, 01:50 PM
I have 8 sets left. These will be the last of them. PM me if you are interested.
i'll take a set, pm sent