e-brake & IRS

[hrosenthal]

Does anyone have any photos of how they ran the e-brake on an IRS.
I'm having trouble figuring out how to keep the cable away from moving parts.
Thanks

[2bking]

Here is a picture where the e-brake cables can be seen.
29459

They are routed along the back of the lower control arms and then sweep over the pumpkin.

[hrosenthal]

Thanks

My lower control arm seems different than yours (your spindle appears to have one upper and lower connection, whereas mine has one on the top and two on the bottom. I was able to route the cable like you said. I'm a little concerned about the cable rubbing the hub (if that's what it's called), but I'll keep an eye on it.

[rich grsc]

Have another look at the picture, thats a FFr lower control arm.