Jester
05-19-2014, 06:06 PM
Question for fellow Coyote owners:
On the intake 90 degree elbow, there is a connection installed for the stock hose coming from the front of the DS head that connects to the stock intake. I cut the connection off the stock intake and used epoxy to attach it to the aftermarket intake elbow. This works fine however, today after trying to track down a squeak that may have been coming from the air filter rubbing against the F panel, I rotated the elbow and the connector that I glued to the intake came off.
I remember seeing a supplier for an after market connection that is made for this application on the forum and I have been meaning to purchase this connector (now seems to be the time) however I can not seem to find the part number or source.
Can someone either point me to the post on the forum that references this connector or provide the supplier and part number.
Much appreciated
Thanks
On the intake 90 degree elbow, there is a connection installed for the stock hose coming from the front of the DS head that connects to the stock intake. I cut the connection off the stock intake and used epoxy to attach it to the aftermarket intake elbow. This works fine however, today after trying to track down a squeak that may have been coming from the air filter rubbing against the F panel, I rotated the elbow and the connector that I glued to the intake came off.
I remember seeing a supplier for an after market connection that is made for this application on the forum and I have been meaning to purchase this connector (now seems to be the time) however I can not seem to find the part number or source.
Can someone either point me to the post on the forum that references this connector or provide the supplier and part number.
Much appreciated
Thanks