A/C Connections and fittings

[donshapansky]

I'm at the stage of rigging up the A/C and heat and I have installed a Ford 5.0 Coyote with the Ford A/C compressor. I'm getting no help from Vintage Air as to connectors for the compressor, I have read on the Forum somewhere there were fittings available but pricey, now I can't find the article. Anyone that can point me to that would much appreciated. Secondly has anyone bought their own tool for crimping the A/C hoses, I can't seem to find local shops that do this.

Don

[CHOTIS BILL]

I have ordered one from Summit and should be delivered today.


Bill Lomenick

[wallace18]

I'm at the stage of rigging up the A/C and heat and I have installed a Ford 5.0 Coyote with the Ford A/C compressor. I'm getting no help from Vintage Air as to connectors for the compressor, I have read on the Forum somewhere there were fittings available but pricey, now I can't find the article. Anyone that can point me to that would much appreciated. Secondly has anyone bought their own tool for crimping the A/C hoses, I can't seem to find local shops that do this.

Don
Contact Mike Everson. He just did a 33 with A/C and that motor.

[donshapansky]

Thanks, I ordered the tool a few minutes ago, I have talked with Mike Everson and bought some stuff from him, he has not got the A/C running as yet due to the same reasons as me. I have a 2013 Boss 302 that I'm going to put on the hoist and look over the connections on it, it is the same compressor as I have purchased.