DaleG
04-25-2014, 12:42 PM
I have highlighted the outlet below the FFR rad filler / cap in the photo attached.28286
Curious that the engine ran fine even with the over flow line attached below the FFR rad cap although the engine would occasionally (very rarely) stall at a stop light. With the FFR filler over flow outlet blocked off - the engine seems to now run flawlessly.
Pretty sure your occasional stalling issue has nothing at all to do with the overflow issue. Stalling is quite common without the Speed Dial kit and /or a JMS (or similar) tune, from all I've read about the Coyote in our applications.
DaleG
04-25-2014, 04:06 PM
My point is to help builders installing Coyote with the proper rad overflow set up.
Excuse me. Sorry for the interruption.:confused: