Speedometer Cable with Screw-On Connector?

[lbperry]

I have a MKII that I built from an '88 Mustang donor. When using the donor speedometer it was necessary to split the speedometer-end connector and clamp it on with a small radiator-style clamp. Every time I take the dash out and have to remove and reinstall the speedometer cable I wing up with scraped up hands and lots of frustration.

Can anyone tell me which speedometer cable to use to get one with a screw on end at the speedometer connector?

Thanks,

[Dan Babb]

Breeze has good cables...used them on my cars. The one you need will depend on if you're using the vehicle speed sensor or not. Give him a call and he'll get you what you need.

http://breezeautomotive.com/search.php?search=cable

[Gale K]

Lawrence , I saw your question posted ffcars, too, thought I'd reply here. I don't have any solutions, but if Breeze has the right one, I may end up with one in my future. The method you outlined certainly is a PITA, and I've been frustrated by it several times myself. I have the Autometer reverse-reading speedo and the hose clamp arrangement on the 90 degree adapter. It is not the greatest setup.