I need power....

[John Dol]

.....for 4 things:

1. Fogs
2. Tail light converter
3. AC/Heater unit
4. Clock

They all need 12V.

How did you guys solve this issue and what gauge wire did you use?

I suppose I could tap from the positive side of the starter to inside the cabin and than disperse from there?

Thanks,

John

[Mark Dougherty]

the heater has a feed already in the RF harness.
the tail light converter does not need one
clock gets a small full time power from your remote solenoid.
fog lights get powered from the head light feed side

[John Dol]

Hey Mark,

There is a sizeable wire coming from the control module for the heater AC unit. According to the schematic it needs a direct 12v source.

Tail light converter is a powered one.

Where did we put the remote solenoid?

So do I tie in to the 12V going to the head light switch?

Thanks,

John