Tocoti
03-28-2014, 05:14 PM
What do you do when you accidentally get the jack bolt spacers mixed up?
NukeMMC
03-28-2014, 06:36 PM
Ask someone who labeled theirs for the measurements. I have MK4 #8189 and my spacers are:
Rear - 3 3/4" & 1 3/4"
Front:
DS Bottom - 3.625" & 2.045 (to longer edge) cut angle is 40deg
DS Top - 2.875" & 2.600", cut angle is 44.5deg
PS Bottom - 2.875" & 2.855", 45.5deg
PS Top - 3.250" & 2.350", 53deg