In-Tank pump with EFI

[pc12cvs]

I'm running an Atomic EFI return style setup and looking to do an in-tank fuel pump with the pump that MSD provides with the kit.

Anybody know of where to get a bracket with a 3/8 inlet/outlet and what other parts I'd need to make this happen?

Thanks,
Noel

[Bob Cowan]

I have searched for one for years, without any luck. Surprisingly enough, I don't think anyone makes one.

[pc12cvs]

Thanks for the response Bob. Sounds like you're confirming what I was starting to realize after a bit of searching. Looks like I'll be going with the Phantom fuel pump system.

[carlewms]

I searched far and wide as well and even ordered a granitelli version from Summit which just was not up to the quality I wanted to use.

I ended up using a pump and bracket from Breeze and, since a return line is not needed with EZ EFI 2.0, I capped the return line on the on the bracket with a vacuum hose cap.

Carl