I identified inventory items

[Triathletedave]

I thought I would ask the forum for help before I go back to FFR. I've completed most of the inventory, but I cannot identify or find any pictures of the following in the build manual or on the forum:

80590 nose mount, left
80591 nose mount, right
80526 fuse panel mount, front
80528 fuse panel mount, rear

Maybe these parts are also listed under another name? Pictures would help if possible.

Also, are the door pulls a part of the basic package? I don't see them referenced anywhere on the inventory list.

Thanks in advance.

Dave

[Goldwing]

26745

Page 398 shows the first 2 better (80590&591). I noted them as hood pin mounts to help me remember.

[07FIREBLADE]

The fuse panel mounts are aluminum brackets. Around the thickness of the firewall. Door pulls were in the box with the door panels for me. I'll try to get pics tomorrow if someone else doesn't beat me to it.

[Goldwing]

I noted the second two as in a bag if that helps. I can't get to those right now.

[Goldwing]

26746

Door pulls. :)

My door pulls were on the backordered list in mine, normally box 3

80728 right door pull
80729 left door pull

Though they are identical.

[Triathletedave]

26745

Page 398 shows the first 2 better (80590&591). I noted them as hood pin mounts to help me remember.

This is what I thought they were. Mine had different numbers on them. Thanks for confirming.

[Triathletedave]

26746

Door pulls. :)

My door pulls were on the backordered list in mine, normally box 3

80728 right door pull
80729 left door pull

Though they are identical.

Thanks for the details. These two part numbers do not appear anywhere on my inventory list, and the parts were not packed with the door panels. I like the look of the aluminum, so getting these will certainly dress up the door panels a bit.

[Triathletedave]

The fuse panel mounts are aluminum brackets. Around the thickness of the firewall. Door pulls were in the box with the door panels for me. I'll try to get pics tomorrow if someone else doesn't beat me to it.

26750
Process of elimination says that these must be the fuse box mounts. The only unmarked parts I have left.

[Triathletedave]

One last silly question: there are only 3 brackets for mounting the seats on the S version. The passenger seat has no bracket on the right side?

[Mechie3]

26750
Process of elimination says that these must be the fuse box mounts. The only unmarked parts I have left.

I think those are the rear trunk hood pin mounts. The fuse box mounts that I have (at least what I think are the mounts) are bend square pieces.

[EODTech87]

One last silly question: there are only 3 brackets for mounting the seats on the S version. The passenger seat has no bracket on the right side?

I was confused about that as well. I only have 3 brackets and a 4th one wasn't listed on the back order list. I've been meaning to call FFR about it but haven't had time to.

[wleehendrick]

One last silly question: there are only 3 brackets for mounting the seats on the S version. The passenger seat has no bracket on the right side?

I got 4 brackets (but I'm not using them); they vary by MY, my donor's an 06. Check the assembly manual for the instructions for your year's donor and see if it's clarified.

[Xusia]

I think those are the rear trunk hood pin mounts.

+1


I got 4 brackets (but I'm not using them); they vary by MY, my donor's an 06. Check the assembly manual for the instructions for your year's donor and see if it's clarified.

I got 4 brackets. My donor is a 2003 WRX sedan.

[Canadian818]

I'm pretty sure I have 4 brackets, and I'm not using them. My donor was a '07 though, not sure if it's any good to you. I'm not sure about the pulls now, I'll have to check my door panel box.

[Triathletedave]

I'm pretty sure I have 4 brackets, and I'm not using them. My donor was a '07 though, not sure if it's any good to you. I'm not sure about the pulls now, I'll have to check my door panel box.

Mine is an 05 donor, and the brackets are different for the right seat for the 02-05 series, and the 06-07 series. I re-checked the installation guide, and it does appear that there are supposed to be 4 brackets for the seats in both series. I'll have to add that to my list for FFR. Thanks for the offer though! :)

[SixStar]

One last silly question: there are only 3 brackets for mounting the seats on the S version. The passenger seat has no bracket on the right side?

We thought we were the only ones! We also only got three.

80348
80349C
80350

[theburner9]

We thought we were the only ones! We also only got three.

80348
80349C
80350

I thought maybe I lost one, but maybe I'm not crazy... I only have 3 as well.

[RM1SepEx]

3 brackets for early cars, four for 05+ manual states 02-05 are early cars but my 05 has the 06-07 seats... I think the change was mid-year