Let there be lights

[John Dol]

And there were lights....

My little heater that could kept it warm enough today. Worked on my lights and got everything working. This was very exciting. Had to reverse a few wires for the blinkers, change out the connector block because it did not hold the gauge wires I used, and figured that the key had to be on for the blinkers to work. In the end they all worked so another major step in the right direction.
I have the Russ thompson turn signal. At first I was going to wire the horn to the stalk button but changed my mind in the end.
Video below.

http://i956.photobucket.com/albums/ae46/jdcoupe1969/th_lightsareon001_zps8a3bc4b1.jpg (http://i956.photobucket.com/albums/ae46/jdcoupe1969/lightsareon001_zps8a3bc4b1.mp4)

John

[skullandbones]

Congrats! That's almost as exciting to get all your gremlins out of the wiring as it is to hear the first start. At least, that's the way I felt. Long sigh of relief............................ Wheeeeeee......................................... ...........................!!!!!!!!! Good luck on the rest of the project. WEK.