3D FFR
03-01-2014, 02:17 PM
Short story, they have gone missing along with the outer tubing. Whitby plans to cut me some new hardware to go over the bolt, but I figured I would come here to ask the length of the bolts for the front and back.
Thank you in advance!
NukeMMC
03-01-2014, 06:51 PM
On mine (#8189)
PS Front top & bottom - 7/16-14 x 7"
DS Front top & bottom- 7/16-14 x 6 1/2"
ALL rear - 7/16-14 x 7"
Tubing is 5/8" x 1/16" wall, welded seam 304SS.
Lengths are:
Rear - 3 3/4" & 1 3/4"
Front:
DS Bottom - 3.625" & 2.045 (to longer edge) cut angle is 40deg
DS Top - 2.875" & 2.600", cut angle is 44.5deg
PS Bottom - 2.875" & 2.855", 45.5deg
PS Top - 3.250" & 2.350", 53deg