GTM Windshield Wiper Wires

[sressue]

On page 298 of the GTM manual it says "the yellow wire that is hanging free is spliced into either side door lock power from the chassis power" (wire 912 or 913 from the Painless harness). Why don't you use the wire in the harness marked "wiper switch B+" 905 wire?
Another question I have is does the pink wire from the column plug run to the windshield wiper motor and to the windshield washer pump?

[sressue]

My mistake...It's wire #912 and #910 not #913 in the Painless harness.

[Jim Schenck]

The door lock circuits (910/912) are heavier gauge wires and use a 20 amp fuse as opposed to 15, the pink wire is for the washer only, not the wiper motor.

[sressue]

Jim, Thanks for the quick reply.