Driver and passenger mirrors

[silas1234]

I have some without the plugs on the end just bare wire. Will that work or do I need the plugs?

[LCD Gauges]

If you can find a suitable male/female connector, and have some experience with pin crimping (or soldering), you can make your own.

Most hobby electronics stores, or even electrical suppliers will have something that will work.

[LS MAN]

We have a complete harness/switch package available, also have the missing connectors to the mirrors. I would keep the factory connectors if possible. If you ever needed to replace a mirror it would be plug & play.

http://quickracingproducts.com/html/electrical.html

Thanks,

[silas1234]

Ok thanks I have a set that had them ripped off.