Help - RF Harness speed sensor connector

[Rodster]

I pulled the speed sensor wire connector off the Ron Francis rear wire harness by accident last night.

Can anyone show me how to fix this?

Here's a picture.

Looks like the wires pulled out of the pins inside - but that really should not have happened right?

Thanks for any help on this...

25715

[CJBergquist]

Ask Ron Francis. http://www.ronfrancis.com/inforequest.asp

He is very good at getting back to customer inquiries.

[edwardb]

I personally wouldn't try to re-use the pins. I would splice a new connector onto the end of the RF wires. I just happened to have that connector with two 7 inch long wires attached. Brand new. Bought it from Mike Forte several months ago for my Mk4 build, thinking the RF connector was different than the electronic pickup on the TKO600. Turns out it's not, and the RF connector plugs right on. So I don't need it. I think it was $10-15. Would need to look at the receipt in my files somewhere. Willing to sell it for a reasonable offer and drop in the mail to you. PM if interested.

[Rodster]

Thanks everyone - I called RF and talked to Chris - best to put a new connector on. $15 or so, not bad for fixing a goof I caused.