Mechie3
01-20-2014, 06:39 PM
Teaming up with one of the shops I work with to offer these bartstools. The base is part of a clutch plate and the centerpiece is a crankshaft pulled from a top fuel dragster. The cranks were all used until they failed so you'll see some marking on a rod journal(s). These weren't showpiece cranks, but real cranks that did the quarter mile! I'm 6' tall and can easily sit on the stool with one foot up and one foot on the floor.
Cost is $200 picked up on in Brownsburg. Shipping is via freight. Quotes so far are on the order of $50 to PA and $100 to FL. Contact me here or at zerodbmotorsports@gmail.com for details.
This specific one is a brank new crank that failed during a test (wrong bearing installed), the actual condition of the cranks vary.
http://i.imgur.com/6UQJhL5.jpg
Cost is $200 picked up on in Brownsburg. Shipping is via freight. Quotes so far are on the order of $50 to PA and $100 to FL. Contact me here or at zerodbmotorsports@gmail.com for details.
This specific one is a brank new crank that failed during a test (wrong bearing installed), the actual condition of the cranks vary.
http://i.imgur.com/6UQJhL5.jpg