818R Harness

[FFRSpec72]

So what are my options for the R harness? If I go with the WRX harness what parts of the harness do I need? I gather I need the headlight/taillight harness, do I assume that the steering stalk will be where the lights will operate from? I'm so confused !

[FFRSpec72]

So at a minimum I suspect that I will need the following wire harness sections:

(1) Front wiring harness
(2) Engine wiring harness would come with engine)
(3) Bulkhead wiring harness
(4) Instrument panel wiring harness
(7) Rear wiring harness
(9) Fuel tank cord

25403

[D Clary]

I am going to use Waynes ECU and graft it to factory the engine harness. I don't plan on using the stock cluster or switches so I will be doing the rest of the wiring from scratch.

[FFRSpec72]

I am going to use Waynes ECU and graft it to factory the engine harness. I don't plan on using the stock cluster or switches so I will be doing the rest of the wiring from scratch.

Thought about that but I'm using a JDM Engine with JDM ecu and think it will be easier to use dieted stock harness to get lights (head/tail/brake) and engine hookup using dieted harness. I will most likely use the stock cluster to start with to keep costs down and put in a data acquisition system also