Security Horn Relay

[Mechie3]

Having a derp moment over here.....:o

Connector B243 for the security horn relay is unplugged. I can't the securiy horn relay (or the security horn, is it just the standard horn?). Anyone have a description or pic. I don't see anything else missing a mating connector.

[Mechie3]

I'm starting to think this goes to nothing. My car didn't come factory with the shock sensor/upgraded security so there's no third horn on the strut tower. Since I don't have that, and that's all the security horn relay goes to maybe I don't have it?

[Bob_n_Cincy]

I'm starting to think this goes to nothing. My car didn't come factory with the shock sensor/upgraded security so there's no third horn on the strut tower. Since I don't have that, and that's all the security horn relay goes to maybe I don't have it?

Here is a picture of mine in the Forester xt. It looks like the standard horn with a single wire connector.
Bob
24678

[Bob_n_Cincy]

Craig
here is the schematic for the security horn.
Bob24679

[Mechie3]

I can't find the relay or the horn. The RY wire is just hanging by itself off the connector for the relay.

[RM1SepEx]

similar horn, different connector... remember me dancing around my 3 horn connector issue?

[Mechie3]

No, I don't. I have two other connectors for the two horns that were up front. This is the connector that's currently orphaned:

http://i.imgur.com/ChWmiyN.jpg

[metalmaker12]

Do you want the security horns, or even factory horns. I am just wiring my own stand alone horns to a separate relay to two Hellas. I am also doing a stand alone setup for the fans. Some models won't have it, your harness will have the plug as it seems you have in the last image . My harness is all covered and tucked in so I can not take a look for reference.

[Mechie3]

My horns will be hella horns from my donor. On my wrx I used a separate relay getting power directly from the battery with the coil on the relay powered by the factory horn connector. I'm just trying to confirm that I didn't miss something and I can pull this connector and associated wires. I do still have the factory shock sensor installed, but I purchased that after the fact. It wasn't factory installed.

[metalmaker12]

Oh ok, I have done it that way too. I can't confirm without my visual for any assistance

[RM1SepEx]

Sorry, mine is all buttoned up... can't verify it visually.

[Bob_n_Cincy]

No, I don't. I have two other connectors for the two horns that were up front. This is the connector that's currently orphaned:

http://i.imgur.com/ChWmiyN.jpg

Craig,
the connector you show above doesn't plug into another connector. It plugs into the "security horn relay".
Bob

[Mechie3]

That's what I'm trying to find out what it is and where it is.

EDIT: Someone replied on nasioc that the 06+ doesn't have the security horn or the relay. Bingo!

[nkw8181]

I'm looking at mine now and don't see a third horn. 06 wrx

[metalmaker12]

Great!

[nkw8181]

pics hope that helps