Fake knock offs

[racephotoman]

Two questions:
The spinner boxed marked "L" assuming for left, are those spinners put on the driver's side? I put them on in the direction of the tire spin, thinking they would stay tight?

Second question, any pictures of safty wiring them to look real?

Walter

[edwardb]

For spinners and adapters: The right hand thread goes on the left side of the car, and the left hand thread goes on the right side of the car. When you go to tighten the spinner, the top should turn towards the back of the car (drivers side clockwise, passenger side counter clockwise). Sounds like you're putting them on the wrong side.

No pictures of safety wires here.

[MPTech]

Mine aren't Safety Wired yet, but here are some tips:

Aesthetically Pleasing Safety Wire Twists (http://www.clubcobra.com/forums/all-cobra-talk/96676-aesthetically-pleasing-safety-wire-twists.html)

24559

24560

I would suggest to wait until your build is absolutely / positively done. I've taken my wheels off & on at least a dozen times during the build and working on the brakes.