Pics of FFR supplied fuel tank

[Canadian818]

So I'm thinking of making my own fuel tank. Bending/forming/welding aluminum is the easy/fun part for me. I need some pics of the holes or flanges in the supplied tank to see if i can replicate them. Are they just holes? Flanges? Stamped locking ring? I would like to use the subaru parts, otherwise the only option i see is something like this Aeromotive Phantom Fuel Systems (http://www.summitracing.com/int/parts/aei-18688/overview/).

Thanks, Adam

[Mechie3]

On the back is a tube with a bead that connects to the fuel filler silicone hose. On top center is a locking ring receiver for the fuel pump. The same thing is on the top side for the fuel level sensor.

[RM1SepEx]

the Oregon build thread has a couple good photos of the bungs and locking collar

I could dig out the extra 33 tank that I have for a photo but it has the inlet for the fuel in the wrong spot...

[Canadian818]

Thanks Dan, not sure how I missed those. I could cut that section of the FFR tank out and rivet it on top of an aluminum tank.