Hot Rod Wiring Question

[maczter]

OK, my wiring manual and my actual harness DO NOT MATCH so I submit to you vets in helping. I have a connector on my harness that mates with the connectors coming off of the column. This connector was labeled Hot Rod Only. Easy enough to figure out. And the manual stated as of last year, it would be pre-wired for the dash and not needed. HOWEVER, the dash wiring is still there as referenced in the manual for the older install, as I have shown in the pics below. What do I do with these extra sets of wires?

[BrentM]

I cut out all the wiring that goes to the dash switches and connected it directly to the column wiring. Most of the switches in the roadster that are on the dash are in the column in the hot rod. Hope it all works.

[wallace18]

I just taped the ones I did not use into the harness under the dash. No one will see them and they are there if I ever need them.