cobrajj
11-21-2013, 12:35 PM
I can't find the recent thread about replacing the black and silver MK3 FFR UCA shaft and pivots, to an improved design? I think there were links to Speedway or Summit with part numbers. I don't want to have mine seize up because of lack of proper lube coverage. Thanks, Jim
CraigS
11-22-2013, 12:06 PM
I think you may find it on the other forum in the autocross section. BTW, I have developed a technique to get better grease dispersion throughout the joint. I remove the 3/8 or 7/16 bolts that attach the tubes to the pivots on the cross beam. That way I can be rotating the pivots around as I am greasing them. The rear won't make a full revolution but it still helps get the grease where it needs to go. The nice thing is that this doesn't mess up your alignment.