Log in

View Full Version : MK IV Coyote Heater installation



armydoc
09-17-2013, 08:22 AM
I've installed the heater and run the hoses from the appropriate places. I need to install the mechanical valve into the hose leading TO the heater but I don't know which one that is. Can anybody clue me in?

Here's the picture to clarify.

21529

armydoc
09-17-2013, 09:22 AM
I found out what I needed to know in case anyone else has this question in the future. The hot water comes out of the passenger side to the heater and then returns to the drivers side.

DaleG
09-18-2013, 01:05 AM
Heads up before you close everything up. Either here or on the other forum, there is a very recent thread on how to prevent heat from coming in when the heater is turned of. Seems to be an issue, but can be corrected.:o

I'm going heater/AC. Nice to know that heater feed is on PS. Thanks.

Slider
09-18-2013, 11:32 AM
Dale, can you post a link ot the thread you reference. I did a few searches and came up with nothing. Thanks sir!


Heads up before you close everything up. Either here or on the other forum, there is a very recent thread on how to prevent heat from coming in when the heater is turned of. Seems to be an issue, but can be corrected.:o

DaleG
09-18-2013, 12:47 PM
Dale, can you post a link ot the thread you reference. I did a few searches and came up with nothing. Thanks sir!

Here ya go:

http://www.ffcars.com/forums/17-factory-five-roadsters/363682-why-does-hot-air-come-when-heater-not-but-vehicle-moving.html?highlight=Heater