Gumball
03-17-2011, 08:30 PM
Does anyone know if the offset brake pushrod (as pictured in the manual) is available separately? I was going to use an adjustable version, but the rod is in a straight line from the hole at the end that connects to the lever and that is causing a slight misalignment when comparing the plane of the pushrod to that of the master cylinder. My concern is that the misalignment could cause premature wear of the seal or the master cylinder piston or bore. I'm guessing that the OEM style pushrod, which has the rod portion offset about 3/8" or so above the hole at the end that connects to the lever would give me just the right alignment. The pedal arm is already cut and the mounting point to the pedal box is modified, so the OEM style rod is probably my best bet.