Who's going to mount the GT300 Wing on a 818S?

[Canadian818]

I really want the most performance possible, and I'm partial to that "race car" look. I'm sure I'll still be annoyed at the idiots asking if its big enough, telling myself I don't care what they think. I was hoping that I could just run the big wing for track days, but now we know I would have to remove the splitter each time as well which is undesirable. I'm doing up my options list, as the time is rapidly approaching, and ordering it now will save me a ton on shipping so I think I'll bite the bullet.

So who plans to run the big carbon fiber wing on the street?

[longislandwrx]

I think you could remove it for low(ish) speed street use, Unless your going to be doing 80+ on the highway every day. FFR would know best, i'll have to review the windtunnel article.

I'll probably be running a similar sized wing with lower risers. I'm sure there's still plenty of airflow 6" lower and I think will really cut down on the obnoxious spoiler look. The prototype images with the low mounted GT spoiler really looked sharp.


looks just slightly above the humps.

21393

[metros]

I'm considering getting the wing but would probably remove it for street duty.