818 LCA question.

[wallace18]

I am using a 2002 WRX sedan as my donor. Is my LCA in the right holes in the frame? The manual and update paper shows 2 differant ways. No photo states if the arm in the photo is a sedan or wagon. Heres some photos of mine. Clarification would be appreciated. Also what adapters are we supposed to use on the wildwood valve? I used the purple ones and now I am short 2 for the clutch line.
212722127321276

[Jay Kravitz]

Good morning,
Yes, you have the control arm in the correct mounting holes for the sedan. As for the Wilwood proportioning valve fittings, the purple ones are used for the masters. The proportioning valve comes with a couple brass fittings in its packaging specifically for itself.

[wallace18]

My valve had no brass fittings just the valve in plastic. Could you send me the correct ones?

[Jay Kravitz]

I have 1 loose new fitting from a valve we used in R&D that I can send you if you would like? When you receive it bring it to your local auto parts store for a matching fitting. Call me when you have a chance with your info (508) 291-3443.
Thanks, Jay.

[wallace18]

Or you can send me the part# and company name. Thanks.

[Jay Kravitz]

Due to the fittings coming in the packaging with the Prop valve I do not have a separate part # specifically for the fittings. The part # for the Wilwood Valve is 260-8419. You can try and contact Wilwood directly & ask them for the fittings. Or go to an auto part store & get 2x 1/8-27 NPT to 3/16" double flare brake line fittings.
Thanks again.

[wallace18]

I will go get the fittings You may need to look at your stock though. My valve had no fittings at all. It was not that they were missing , it may have been the wrong part.

[Jay Kravitz]

I'm sorry about that.
I just walked out to the warehouse & checked our stock. We have approx. 40 packages & they all have the 2x fittings.